AHH SERIES

Mini one-armed harmonic tilting rotary table - THE COMBINATION

ACHB145

The AHH series is a rotary/swivel table in single-arm design driven by a Harmonic Drive gear and is popular as a low-cost positioning unit in CNC machine tools or in automation as a fourth and fifth axis. Siemens and Bosch-Rexroth are available as drives. The AHH series can be used as a dividing head or for continuous movements, enabling the machining of complex operations and extending the machining range.

Other AHH series products and sizes

ACHB145 Highlights

  • High precision, with Harmonicdrive reduction gear as the core structure. The internal drive is a simulated engagement of multiple teeth in a symmetrical position of 180 degrees, so that the gear pitch error and the cumulative tooth pitch error have a more uniform effect on the drive accuracy, and very high positioning accuracy can be achieved.
  • High load capacity. Harmonicdrive transmission. Together with the number of teeth engaged at the same time, the load capacity is higher than other transmission methods. Smooth transmission, no vibrations.
  • The Harmonicdrive reduction gear consists of a shaft generator, a shaft gear and a spur gear, where the shaft gear is a flexible, thin-walled, elastic part with an outer ring gear that continuously deforms during ring transmission. This eliminates backlash when interacting with the spur gear and achieves high precision and low transmission backlash.
  • Large gear ratio. The single stage reduction ratio can reach 80-100, so you can get a large output torque.

Specification

Model ACHB145
Worktable diameter mm 145 Tilt axis structure Roller Cam
Center bore diameter mm 30 Rotary axis structure Harmony
height of table( tilting 0°) mm 186 Tilting angle range -40°-120°
height of center( tilting 90°) mm 135 Rotation angle range 360°
Transmission ratio of tilt axis 1 : 5o Allowable load (when table clamped) FXL*1
(Tilt axis)
178
Transmission ratio of rotary axis 1: 100
FXL*1
(Tilt axis)
280
Allowable
loading weight kg
0° Horizontal 40
Tilting(O -90°) 30

Specification for Inspection Accuracy

Model ACHB145
Parallelism between table
surface and base
mm 0.01
Flatness of table surface mm 0.01
Run-out of table surface mm 0.01
Deviation between centerhole
and center of guide block
mm 0.02
Deviation between centerhole
and center of guide block
arc.sec 25
repeatability (Rotary) arc.sec 10
indexing precision(Tilting) arc.sec 25
repeatability (Tilting) arc.sec 10

Dimensional drawings

Request ACHB145 now

Fill out this field
Fill out this field
Fill out this field
Please enter a valid email address.
Motor / drive controller
Select an option
Through hole
Select an option
Menü
en_USEnglish