ACHB145

AHH SERIES

Mini one-armed harmonic tilting rotary table - THE COMBINATION

The AHH series is a rotary/swivel table in single-arm design driven by a Harmonic Drive gear and is popular as a low-cost positioning unit in CNC machine tools or in automation as a fourth and fifth axis. Siemens and Bosch-Rexroth are available as drives. The AHH series can be used as a dividing head or for continuous movements, enabling the machining of complex operations and extending the machining range.

Request product now

from €18,450.00

Other AHH series products and sizes

ACHB145 Highlights

High precision, with Harmonicdrive reduction gear as the core structure. The internal drive is a simulated engagement of multiple teeth in a symmetrical position of 180 degrees, so that the gear pitch error and the cumulative tooth pitch error have a more uniform effect on the drive accuracy, and very high positioning accuracy can be achieved.
High load capacity. Harmonicdrive transmission. Together with the number of teeth engaged at the same time, the load capacity is higher than other transmission methods. Smooth transmission, no vibrations.
The Harmonicdrive reduction gear consists of a shaft generator, a shaft gear and a spur gear, where the shaft gear is a flexible, thin-walled, elastic part with an outer ring gear that continuously deforms during ring transmission. This eliminates backlash when interacting with the spur gear and achieves high precision and low transmission backlash.
Large gear ratio. The single stage reduction ratio can reach 80-100, so you can get a large output torque.

Specification

Model		ACHB145
Worktable diameter mm		145	Tilt axis structure		Roller Cam
Center bore diameter mm		30	Rotary axis structure		Harmony
height of table( tilting 0°) mm		186	Tilting angle range		-40°-120°
height of center( tilting 90°) mm		135	Rotation angle range		360°
Transmission ratio of tilt axis		1 : 5o	Allowable load (when table clamped)	FXL*1 (Tilt axis)	178
Transmission ratio of rotary axis		1: 100
				FXL*1 (Tilt axis)	280
Allowable loading weight kg	0° Horizontal	40
	Tilting(O -90°)	30

Specification for Inspection Accuracy

Model		ACHB145
Parallelism between table surface and base	mm	0.01
Flatness of table surface	mm	0.01
Run-out of table surface	mm	0.01
Deviation between centerhole and center of guide block	mm	0.02
Deviation between centerhole and center of guide block	arc.sec	25
repeatability (Rotary)	arc.sec	10
indexing precision(Tilting)	arc.sec	25
repeatability (Tilting)	arc.sec	10

Dimensional drawings

More Information

Download Turntable Brochure