AHH SERIES

Mini one-armed harmonic tilting rotary table - THE COMBINATION

ATRB200

The AHH series is a rotary/swivel table in single-arm design driven by a Harmonic Drive gear and is popular as a low-cost positioning unit in CNC machine tools or in automation as a fourth and fifth axis. Siemens and Bosch-Rexroth are available as drives. The AHH series can be used as a dividing head or for continuous movements, enabling the machining of complex operations and extending the machining range.

Other AHH series products and sizes

ATRB200 Highlights

  • High precision, with Harmonicdrive reduction gear as the core structure. The internal drive is a simulated engagement of multiple teeth in a symmetrical position of 180 degrees, so that the gear pitch error and the cumulative tooth pitch error have a more uniform effect on the drive accuracy, and very high positioning accuracy can be achieved.
  • High load capacity. Harmonicdrive transmission. Together with the number of teeth engaged at the same time, the load capacity is higher than other transmission methods. Smooth transmission, no vibrations.
  • The Harmonicdrive reduction gear consists of a shaft generator, a shaft gear and a spur gear, where the shaft gear is a flexible, thin-walled, elastic part with an outer ring gear that continuously deforms during ring transmission. This eliminates backlash when interacting with the spur gear and achieves high precision and low transmission backlash.
  • Large gear ratio. The single stage reduction ratio can reach 80-100, so you can get a large output torque.

Specification

Worktable diameter mm ATRB200
200 Tilt axis structure Roller Cam
Center bore diameter mm 40 Rotary axis structure Roller Cam
height of table( tilting 0° ) mm 210 Tilting angle range -20°-+120°
height of center( tilting 90°) mm 210 Rotation angle range 360°
Transmission ratio of tilt axis 1: 60 Allowable load (when table clamped) FXL>1
(Rotary axis)
280
Transmission ratio of rotary axis 1: 5o
Allowable
loading weight kg
0° Horizontal 5o FXL>1
(Rotary axis)
615
Tilting(O - 90°) 35

Specification for Inspection Accuracy

Model ATRB145
Parallelism between table
surface and base
mm 0.02
Flatness of table surface mm 0.02
Run-out of table surface mm 0.02
Deviation between centerhole
and center of guide block
mm 0.02
Deviation between centerhole
and center of guide block
arc.sec 20
repeatability (Rotary) arc.sec 15
indexing precision(Tilting) arc.sec 15
repeatability (Tilting) arc.sec 10

Dimensional drawings

Request ATRB200 now

Fill out this field
Fill out this field
Fill out this field
Please enter a valid email address.
Motor / drive controller
Select an option
Through hole
Select an option
Menü
en_USEnglish